Curettes

Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender.

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe.

Langer curettes have shank angles like Gracey curettes. The blades are universal so they have sharp cutting edges on both sides of the blade with a rounded toe and are set at a 90° angle to the terminal shank.

Check out our extensive selection of Curettes including Barnhart, Columbia, Langer, University of California, Indiana University & McCall!

Barnhart

ImageSKUProductSummary
CESCBH1-2Barnhart #1-2

The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCBH1-2Barnhart #1-2

The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCBH1-2Barnhart #1-2

The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCBH1-2Barnhart #1-2

The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Handle is Medium round, additional handle options are shown below.

VSCBH1-2Barnhart #1-2

The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our Relyant Handle, additional handle options are shown below.

CENSBH1-2Barnhart #1-2

The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSBH1-2Barnhart #1-2

The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCBH5-6Barnhart #5-6

The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCBH5-6Barnhart #5-6

The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCBH5-6Barnhart #5-6

The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCBH5-6Barnhart #5-6

The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Handle is Medium round, additional handle options are shown below.

VSCBH5-6Barnhart #5-6

The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our Relyant Handle, additional handle options are shown below.

CENSBH5-6Barnhart #5-6

The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSBH5-6Barnhart #5-6

The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCBH5R-6RBarnhart #5R-6R

Modified Barnhart 5-6 with a rigid terminal shank. The terminal shank is 1.2 mm in diameter and 10 mm long with a blade width of 0.9 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCBH5R-6RBarnhart #5R-6R

Modified Barnhart 5-6 with a rigid terminal shank. The terminal shank is 1.2 mm in diameter and 10 mm long with a blade width of 0.9 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCBH5R-6RBarnhart #5R-6R

Modified Barnhart 5-6 with a rigid terminal shank. The terminal shank is 1.2 mm in diameter and 10 mm long with a blade width of 0.9 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Round Handle, additional handle options are shown below.

VSCBH5R-6RBarnhart #5R-6R

Modified Barnhart 5-6 with a rigid terminal shank. The terminal shank is 1.2 mm in diameter and 10 mm long with a blade width of 0.9 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our Relyant Handle, additional handle options are shown below.

CENSBH5R-6RBarnhart #5R-6R

Modified Barnhart 5-6 with a rigid terminal shank. The terminal shank is 1.2 mm in diameter and 10 mm long with a blade width of 0.9 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSBH5R-6RBarnhart #5R-6R

Modified Barnhart 5-6 with a rigid terminal shank. The terminal shank is 1.2 mm in diameter and 10 mm long with a blade width of 0.9 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCBH5S-6SBarnhart #5S-6S

Modified Barnhart 5-6 with slender blades. The terminal shank is 10 mm long with a blade width of 0.7 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCBH5S-6SBarnhart #5S-6S

Modified Barnhart 5-6 with slender blades. The terminal shank is 10 mm long with a blade width of 0.7 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCBH5S-6SBarnhart #5S-6S

Modified Barnhart 5-6 with slender blades. The terminal shank is 10 mm long with a blade width of 0.7 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCBH5S-6SBarnhart #5S-6S

Modified Barnhart 5-6 with slender blades. The terminal shank is 10 mm long with a blade width of 0.7 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Handle is Medium round, additional handle options are shown below.

VSCBH5S-6SBarnhart #5S-6S

Modified Barnhart 5-6 with slender blades. The terminal shank is 10 mm long with a blade width of 0.7 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our Relyant Handle, additional handle options are shown below.

CENSBH5S-6SBarnhart #5S-6S

Modified Barnhart 5-6 with slender blades. The terminal shank is 10 mm long with a blade width of 0.7 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSBH5S-6SBarnhart #5S-6S

Modified Barnhart 5-6 with slender blades. The terminal shank is 10 mm long with a blade width of 0.7 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Round Handle, additional handle options are shown below.

Columbia

ImageSKUProductSummary
CESCCO13-14Columbia #13-14

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1 mm in diameter and 8 mm long with a blade width of 0.9 mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCCO13-14Columbia #13-14

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1 mm in diameter and 8 mm long with a blade width of 0.9 mm. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCCO13-14Columbia #13-14

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1 mm in diameter and 8 mm long with a blade width of 0.9 mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCCO13-14Columbia #13-14

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1 mm in diameter and 8 mm long with a blade width of 0.9 mm. Handle is Medium round, additional handle options are shown below.

VSCCO13-14Columbia #13-14

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1 mm in diameter and 8 mm long with a blade width of 0.9 mm. Featuring our Relyant Handle, additional handle options are shown below.

CENSCO13-14Columbia #13-14

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1 mm in diameter and 8 mm long with a blade width of 0.9 mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSCO13-14Columbia #13-14

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1 mm in diameter and 8 mm long with a blade width of 0.9 mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCCO2R-2LColumbia #2R-2L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.2 mm in diameter and 14 mm long with an elliptical blade shape that is 1.2 mm wide. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCCO2R-2LColumbia #2R-2L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.2 mm in diameter and 14 mm long with an elliptical blade shape that is 1.2 mm wide. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCCO2R-2LColumbia #2R-2L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.2 mm in diameter and 14 mm long with an elliptical blade shape that is 1.2 mm wide. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCCO2R-2LColumbia #2R-2L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.2 mm in diameter and 14 mm long with an elliptical blade shape that is 1.2 mm wide. Handle is Medium round, additional handle options are shown below.

VSCCO2R-2LColumbia #2R-2L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.2 mm in diameter and 14 mm long with an elliptical blade shape that is 1.2 mm wide. Featuring our Relyant Handle, additional handle options are shown below.

CENSCO2R-2LColumbia #2R-2L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.2 mm in diameter and 14 mm long with an elliptical blade shape that is 1.2 mm wide. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSCO2R-2LColumbia #2R-2L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.2 mm in diameter and 14 mm long with an elliptical blade shape that is 1.2 mm wide. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCCO4R-4LColumbia #4R-4L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.1 mm in diameter and 12 mm long with an elliptical blade shape that is 1.2 mm wide. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCCO4R-4LColumbia #4R-4L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.1 mm in diameter and 12 mm long with an elliptical blade shape that is 1.2 mm wide. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCCO4R-4LColumbia #4R-4L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.1 mm in diameter and 12 mm long with an elliptical blade shape that is 1.2 mm wide. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCCO4R-4LColumbia #4R-4L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.1 mm in diameter and 12 mm long with an elliptical blade shape that is 1.2 mm wide. Handle is Medium round, additional handle options are shown below.

VSCCO4R-4LColumbia #4R-4L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.1 mm in diameter and 12 mm long with an elliptical blade shape that is 1.2 mm wide. Featuring our Relyant Handle, additional handle options are shown below.

CENSCO4R-4LColumbia #4R-4L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.1 mm in diameter and 12 mm long with an elliptical blade shape that is 1.2 mm wide. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSCO4R-4LColumbia #4R-4L

Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.1 mm in diameter and 12 mm long with an elliptical blade shape that is 1.2 mm wide. Featuring our DuraLite Round Handle, additional handle options are shown below.

Younger-Good

ImageSKUProductSummary

Langer

ImageSKUProductSummary
CESCLN1-2Langer #1-2

Has bends similar to the Gracey 11-12. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCLN1-2Langer #1-2

Has bends similar to the Gracey 11-12. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCLN1-2Langer #1-2

Has bends similar to the Gracey 11-12. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCLN1-2Langer #1-2

Has bends similar to the Gracey 11-12. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Handle is Medium round, additional handle options are shown below.

VSCLN1-2Langer #1-2

Has bends similar to the Gracey 11-12. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our Relyant Handle, additional handle options are shown below.

CENSLN1-2Langer #1-2

Has bends similar to the Gracey 11-12. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSLN1-2Langer #1-2

Has bends similar to the Gracey 11-12. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCLN17-18Langer #17-18

Has bends similar to the Gracey 17-18. The terminal shank is 1 mm in diameter and 11 mm long with a blade width of 0.9 mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCLN17-18Langer #17-18

Has bends similar to the Gracey 17-18. The terminal shank is 1 mm in diameter and 11 mm long with a blade width of 0.9 mm. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCLN17-18Langer #17-18

Has bends similar to the Gracey 17-18. The terminal shank is 1 mm in diameter and 11 mm long with a blade width of 0.9 mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCLN17-18Langer #17-18

Has bends similar to the Gracey 17-18. The terminal shank is 1 mm in diameter and 11 mm long with a blade width of 0.9 mm. Handle is Medium round, additional handle options are shown below.

VSCLN17-18Langer #17-18

Has bends similar to the Gracey 17-18. The terminal shank is 1 mm in diameter and 11 mm long with a blade width of 0.9 mm. Featuring our Relyant Handle, additional handle options are shown below.

CENSLN17-18Langer #17-18

Has bends similar to the Gracey 17-18. The terminal shank is 1 mm in diameter and 11 mm long with a blade width of 0.9 mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSLN17-18Langer #17-18

Has bends similar to the Gracey 17-18. The terminal shank is 1 mm in diameter and 11 mm long with a blade width of 0.9 mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCLN3-4Langer #3-4

Has bends similar to the Gracey 13-14. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCLN3-4Langer #3-4

Has bends similar to the Gracey 13-14. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCLN3-4Langer #3-4

Has bends similar to the Gracey 13-14. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCLN3-4Langer #3-4

Has bends similar to the Gracey 13-14. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Handle is Medium round, additional handle options are shown below.

VSCLN3-4Langer #3-4

Has bends similar to the Gracey 13-14. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our Relyant Handle, additional handle options are shown below.

CENSLN3-4Langer #3-4

Has bends similar to the Gracey 13-14. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSLN3-4Langer #3-4

Has bends similar to the Gracey 13-14. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCLN5-6Langer #5-6

Has bends similar to the Gracey 7-8. The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.9 mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCLN5-6Langer #5-6

Has bends similar to the Gracey 7-8. The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.9 mm. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCLN5-6Langer #5-6

Has bends similar to the Gracey 7-8. The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.9 mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCLN5-6Langer #5-6

Has bends similar to the Gracey 7-8. The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.9 mm. Handle is Medium round, additional handle options are shown below.

VSCLN5-6Langer #5-6

Has bends similar to the Gracey 7-8. The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.9 mm. Featuring our Relyant Handle, additional handle options are shown below.

CENSLN5-6Langer #5-6

Has bends similar to the Gracey 7-8. The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.9 mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSLN5-6Langer #5-6

Has bends similar to the Gracey 7-8. The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.9 mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESISLN5-6MMLanger #5-6 (Implant Maintenance)

Has bends similar to the Gracey 7-8. The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.9 mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

University of California

ImageSKUProductSummary
CESCR3-R4Ratcliff #3-4

Mirror image universal curette with 0.7 mm blade width, a terminal shank set at 45° to the handle and a 10 mm reach. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCR3-R4Ratcliff #3-4

Mirror image universal curette with 0.7 mm blade width, a terminal shank set at 45° to the handle and a 10 mm reach. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCR3-R4Ratcliff #3-4

Mirror image universal curette with 0.7 mm blade width, a terminal shank set at 45° to the handle and a 10 mm reach. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCR3-R4Ratcliff #3-4

Mirror image universal curette with 0.7 mm blade width, a terminal shank set at 45° to the handle and a 10 mm reach. Handle is Medium round, additional handle options are shown below.

VSCR3-R4Ratcliff #3-4

Mirror image universal curette with 0.7 mm blade width, a terminal shank set at 45° to the handle and a 10 mm reach. Featuring our Relyant Handle, additional handle options are shown below.

CENSR3-R4Ratcliff #3-4

Mirror image universal curette with 0.7 mm blade width, a terminal shank set at 45° to the handle and a 10 mm reach. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSR3-R4Ratcliff #3-4

Mirror image universal curette with 0.7 mm blade width, a terminal shank set at 45° to the handle and a 10 mm reach. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCUC3-4Rule #3-4

Mirror image universal curette with 0.8 mm blade width, a terminal shank set at 47° to the handle and a 10 mm reach. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCUC3-4Rule #3-4

Mirror image universal curette with 0.8 mm blade width, a terminal shank set at 47° to the handle and a 10 mm reach. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCUC3-4Rule #3-4

Mirror image universal curette with 0.8 mm blade width, a terminal shank set at 47° to the handle and a 10 mm reach. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCUC3-4Rule #3-4

Mirror image universal curette with 0.8 mm blade width, a terminal shank set at 47° to the handle and a 10 mm reach. Handle is Medium round, additional handle options are shown below.

VSCUC3-4Rule #3-4

Mirror image universal curette with 0.8 mm blade width, a terminal shank set at 47° to the handle and a 10 mm reach. Featuring our Relyant Handle, additional handle options are shown below.

CENSUC3-4Rule #3-4

Mirror image universal curette with 0.8 mm blade width, a terminal shank set at 47° to the handle and a 10 mm reach. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSUC3-4Rule #3-4

Mirror image universal curette with 0.8 mm blade width, a terminal shank set at 47° to the handle and a 10 mm reach. Featuring our DuraLite Round Handle, additional handle options are shown below.

Indiana University

ImageSKUProductSummary
CESCIU13-14Indiana University #13-14

The terminal shanks are 1.1 mm in diameter and 13 mm long. The blades are 1.1 mm wide and have a gentle curve that tapers to a point. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCIU13-14Indiana University #13-14

The terminal shanks are 1.1 mm in diameter and 13 mm long. The blades are 1.1 mm wide and have a gentle curve that tapers to a point. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCIU13-14Indiana University #13-14

The terminal shanks are 1.1 mm in diameter and 13 mm long. The blades are 1.1 mm wide and have a gentle curve that tapers to a point. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCIU13-14Indiana University #13-14

The terminal shanks are 1.1 mm in diameter and 13 mm long. The blades are 1.1 mm wide and have a gentle curve that tapers to a point. Handle is Medium round, additional handle options are shown below.

VSCIU13-14Indiana University #13-14

The terminal shanks are 1.1 mm in diameter and 13 mm long. The blades are 1.1 mm wide and have a gentle curve that tapers to a point. Featuring our Relyant Handle, additional handle options are shown below.

CENSIU13-14Indiana University #13-14

The terminal shanks are 1.1 mm in diameter and 13 mm long. The blades are 1.1 mm wide and have a gentle curve that tapers to a point. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSIU13-14Indiana University #13-14

The terminal shanks are 1.1 mm in diameter and 13 mm long. The blades are 1.1 mm wide and have a gentle curve that tapers to a point. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCIU17-18Indiana University #17-18

The shank curvature adapts easily to 2nd and 3rd molars. The blades have a rounded toe and are 1 mm wide. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCIU17-18Indiana University #17-18

The shank curvature adapts easily to 2nd and 3rd molars. The blades have a rounded toe and are 1 mm wide. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCIU17-18Indiana University #17-18

The shank curvature adapts easily to 2nd and 3rd molars. The blades have a rounded toe and are 1 mm wide. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCIU17-18Indiana University #17-18

The shank curvature adapts easily to 2nd and 3rd molars. The blades have a rounded toe and are 1 mm wide. Handle is Medium round, additional handle options are shown below.

VSCIU17-18Indiana University #17-18

The shank curvature adapts easily to 2nd and 3rd molars. The blades have a rounded toe and are 1 mm wide. Featuring our Relyant Handle, additional handle options are shown below.

CENSIU17-18Indiana University #17-18

The shank curvature adapts easily to 2nd and 3rd molars. The blades have a rounded toe and are 1 mm wide. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSIU17-18Indiana University #17-18

The shank curvature adapts easily to 2nd and 3rd molars. The blades have a rounded toe and are 1 mm wide. Featuring our DuraLite Round Handle, additional handle options are shown below.

McCall

ImageSKUProductSummary
CESCMC13-14McCall #13-14

The terminal shanks are 1.1 mm in diameter and 9 mm long with an elliptical blade shape with a rounded toe that is 1.2 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCMC13-14McCall #13-14

The terminal shanks are 1.1 mm in diameter and 9 mm long with an elliptical blade shape with a rounded toe that is 1.2 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCMC13-14McCall #13-14

The terminal shanks are 1.1 mm in diameter and 9 mm long with an elliptical blade shape with a rounded toe that is 1.2 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCMC13-14McCall #13-14

The terminal shanks are 1.1 mm in diameter and 9 mm long with an elliptical blade shape with a rounded toe that is 1.2 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Handle is Medium round, additional handle options are shown below.

VSCMC13-14McCall #13-14

The terminal shanks are 1.1 mm in diameter and 9 mm long with an elliptical blade shape with a rounded toe that is 1.2 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our Relyant Handle, additional handle options are shown below.

CENSMC13-14McCall #13-14

The terminal shanks are 1.1 mm in diameter and 9 mm long with an elliptical blade shape with a rounded toe that is 1.2 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSMC13-14McCall #13-14

The terminal shanks are 1.1 mm in diameter and 9 mm long with an elliptical blade shape with a rounded toe that is 1.2 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCM13S-14SMcCall #13S-14S

The terminal shank is 1.1 mm in diameter and 9 mm long with a pointed blade shape that is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCM13S-14SMcCall #13S-14S

The terminal shank is 1.1 mm in diameter and 9 mm long with a pointed blade shape that is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCM13S-14SMcCall #13S-14S

The terminal shank is 1.1 mm in diameter and 9 mm long with a pointed blade shape that is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCM13S-14SMcCall #13S-14S

The terminal shank is 1.1 mm in diameter and 9 mm long with a pointed blade shape that is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Handle is Medium round, additional handle options are shown below.

VSCM13S-14SMcCall #13S-14S

The terminal shank is 1.1 mm in diameter and 9 mm long with a pointed blade shape that is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our Relyant Handle, additional handle options are shown below.

CENSM13S-14SMcCall #13S-14S

The terminal shank is 1.1 mm in diameter and 9 mm long with a pointed blade shape that is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSM13S-14SMcCall #13S-14S

The terminal shank is 1.1 mm in diameter and 9 mm long with a pointed blade shape that is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCMC17-18McCall #17-18

The shank curvature adapts easily to 2nd and 3rd molars. The elliptical blade shape has a rounded toe and is 1.2 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCMC17-18McCall #17-18

The shank curvature adapts easily to 2nd and 3rd molars. The elliptical blade shape has a rounded toe and is 1.2 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCMC17-18McCall #17-18

The shank curvature adapts easily to 2nd and 3rd molars. The elliptical blade shape has a rounded toe and is 1.2 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite Round Handle, additional handle options are shown below.

VSCMC17-18McCall #17-18

The shank curvature adapts easily to 2nd and 3rd molars. The elliptical blade shape has a rounded toe and is 1.2 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our Relyant Handle, additional handle options are shown below.

CENSMC17-18McCall #17-18

The shank curvature adapts easily to 2nd and 3rd molars. The elliptical blade shape has a rounded toe and is 1.2 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSMC17-18McCall #17-18

The shank curvature adapts easily to 2nd and 3rd molars. The elliptical blade shape has a rounded toe and is 1.2 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCM17S-18SMcCall #17S-18S

The shank curvature adapts easily to 2nd and 3rd molars. The straight-sided universal blade has a rounded toe and is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCM17S-18SMcCall #17S-18S

The shank curvature adapts easily to 2nd and 3rd molars. The straight-sided universal blade has a rounded toe and is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCM17S-18SMcCall #17S-18S

The shank curvature adapts easily to 2nd and 3rd molars. The straight-sided universal blade has a rounded toe and is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCM17S-18SMcCall #17S-18S

The shank curvature adapts easily to 2nd and 3rd molars. The straight-sided universal blade has a rounded toe and is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Handle is Medium round, additional handle options are shown below.

VSCM17S-18SMcCall #17S-18S

The shank curvature adapts easily to 2nd and 3rd molars. The straight-sided universal blade has a rounded toe and is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our Relyant Handle, additional handle options are shown below.

CENSM17S-18SMcCall #17S-18S

The shank curvature adapts easily to 2nd and 3rd molars. The straight-sided universal blade has a rounded toe and is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSM17S-18SMcCall #17S-18S

The shank curvature adapts easily to 2nd and 3rd molars. The straight-sided universal blade has a rounded toe and is 1 mm wide. McCall curettes have universal blades that have sharp cutting edges on both sides of the blade. Featuring our DuraLite Round Handle, additional handle options are shown below.

Nordent Hygiene Instruments

We offer the highest quality and the best value in the industry.

We use only the finest domestic high-carbon surgical stainless steels and a proprietary cryogenic hardening and tempering process to ensure long-lasting sharpness and durability. Each instrument is meticulously shaped and finished by expert craftsmen and 100% made in the USA!