Posterior Scalers

Posterior Scalers are used to remove deposits from supragingival surfaces of posterior teeth. There are two common design classifications for posterior scalers. They are Jacquette scalers (straight blade that tapers to a point) and sickle scalers (curved blade that tapers to a point). In this section you will find a wide assortment of standard and unique posterior scalers for every application.

Remove deposits from supragingival surfaces of posterior teeth!

Jacquettes

ImageSKUProductSummary

Sickles

ImageSKUProductSummary
CEISBH5-6Barnhart #5-6 (Implant Maintenance)

The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

CESCCK6Crane Kaplan #6

Mirror image blades that taper to a point from a 2 mm width. The terminal shank is set at 35° to the handle with a reach of 15 mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCCK6Crane Kaplan #6

Mirror image blades that taper to a point from a 2 mm width. The terminal shank is set at 35° to the handle with a reach of 15 mm. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCCK6Crane Kaplan #6

Mirror image blades that taper to a point from a 2 mm width. The terminal shank is set at 35° to the handle with a reach of 15 mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCCK6Crane Kaplan #6

Mirror image blades that taper to a point from a 2 mm width. The terminal shank is set at 35° to the handle with a reach of 15 mm. Handle is Medium round, additional handle options are shown below.

VSCCK6Crane Kaplan #6

Mirror image blades that taper to a point from a 2 mm width. The terminal shank is set at 35° to the handle with a reach of 15 mm. Featuring our Relyant Handle, additional handle options are shown below.

CESCCI2-3Ivory #2-3

Mirror image blades that taper to a point from a 2 mm width. The terminal shank is set at 32° to the handle with a reach of 13mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCCI2-3Ivory #2-3

Mirror image blades that taper to a point from a 2 mm width. The terminal shank is set at 32° to the handle with a reach of 13mm. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCCI2-3Ivory #2-3

Mirror image blades that taper to a point from a 2 mm width. The terminal shank is set at 32° to the handle with a reach of 13mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCCI2-3Ivory #2-3

Mirror image blades that taper to a point from a 2 mm width. The terminal shank is set at 32° to the handle with a reach of 13mm. Handle is Medium round, additional handle options are shown below.

VSCCI2-3Ivory #2-3

Mirror image blades that taper to a point from a 2 mm width. The terminal shank is set at 32° to the handle with a reach of 13mm. Featuring our Relyant Handle, additional handle options are shown below.

CEISLN1-2MMLanger #1-2 (Implant Maintenance)

Has bends similar to the Gracey 11-12. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

CEISLN1-2Langer #1-2 (Implant Maintenance)

Has bends similar to the Gracey 11-12. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

CEISLN3-4MMLanger #3-4 (Implant Maintenance)

Has bends similar to the Gracey 13-14. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

CEISLN3-4Langer #3-4 (Implant Maintenance)

Has bends similar to the Gracey 13-14. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

CEISLN5-6Langer #5-6 (Implant Maintenance)

Has bends similar to the Gracey 7-8. The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.9 mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

CESCN129N129

The unique bends of the N129 are easy to adapt to any area without excessive adjustments, while the long slender sickle blades allow for interproximal insertion. Mirror image blades on a medium-reach terminal shank. The blades taper to a point from a 0.8 mm width and have a reach of 10 mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCN129N129

The unique bends of the N129 are easy to adapt to any area without excessive adjustments, while the long slender sickle blades allow for interproximal insertion. Mirror image blades on a medium-reach terminal shank. The blades taper to a point from a 0.8 mm width and have a reach of 10 mm. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCN129N129

The unique bends of the N129 are easy to adapt to any area without excessive adjustments, while the long slender sickle blades allow for interproximal insertion. Mirror image blades on a medium-reach terminal shank. The blades taper to a point from a 0.8 mm width and have a reach of 10 mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCN129N129

The unique bends of the N129 are easy to adapt to any area without excessive adjustments, while the long slender sickle blades allow for interproximal insertion. Mirror image blades on a medium-reach terminal shank. The blades taper to a point from a 0.8 mm width and have a reach of 10 mm. Handle is Medium round, additional handle options are shown below.

VSCN129N129

The unique bends of the N129 are easy to adapt to any area without excessive adjustments, while the long slender sickle blades allow for interproximal insertion. Mirror image blades on a medium-reach terminal shank. The blades taper to a point from a 0.8 mm width and have a reach of 10 mm. Featuring our Relyant Handle, additional handle options are shown below.

CENSN129N129

The unique bends of the N129 are easy to adapt to any area without excessive adjustments, while the long slender sickle blades allow for interproximal insertion. Mirror image blades on a medium-reach terminal shank. The blades taper to a point from a 0.8 mm width and have a reach of 10 mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSN129N129

The unique bends of the N129 are easy to adapt to any area without excessive adjustments, while the long slender sickle blades allow for interproximal insertion. Mirror image blades on a medium-reach terminal shank. The blades taper to a point from a 0.8 mm width and have a reach of 10 mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCN2Offset Universal #2

Mirror image blades that taper to a point from a 0.8 mm width. The terminal shank is offset 60° from centerline and has a 10 mm reach. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCN2Offset Universal #2

Mirror image blades that taper to a point from a 0.8 mm width. The terminal shank is offset 60° from centerline and has a 10 mm reach. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCN2Offset Universal #2

Mirror image blades that taper to a point from a 0.8 mm width. The terminal shank is offset 60° from centerline and has a 10 mm reach. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCN2Offset Universal #2

Mirror image blades that taper to a point from a 0.8 mm width. The terminal shank is offset 60° from centerline and has a 10 mm reach. Handle is Medium round, additional handle options are shown below.

VSCN2Offset Universal #2

Mirror image blades that taper to a point from a 0.8 mm width. The terminal shank is offset 60° from centerline and has a 10 mm reach. Featuring our Relyant Handle, additional handle options are shown below.

CENSN2Offset Universal #2

Mirror image blades that taper to a point from a 0.8 mm width. The terminal shank is offset 60° from centerline and has a 10 mm reach. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSN2Offset Universal #2

Mirror image blades that taper to a point from a 0.8 mm width. The terminal shank is offset 60° from centerline and has a 10 mm reach. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCN4Offset Universal Sickle #4

Both sickles have an identical moderate size, medium-reach length and blade widths of 0.8 mm that taper to a point. The tips have a 20° mirror image offset to allow better access to anteriors and premolars. Also known as the R138. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCN4Offset Universal Sickle #4

Both sickles have an identical moderate size, medium-reach length and blade widths of 0.8 mm that taper to a point. The tips have a 20° mirror image offset to allow better access to anteriors and premolars. Also known as the R138. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCN4Offset Universal Sickle #4

Both sickles have an identical moderate size, medium-reach length and blade widths of 0.8 mm that taper to a point. The tips have a 20° mirror image offset to allow better access to anteriors and premolars. Also known as the R138. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCN4Offset Universal Sickle #4

Both sickles have an identical moderate size, medium-reach length and blade widths of 0.8 mm that taper to a point. The tips have a 20° mirror image offset to allow better access to anteriors and premolars. Also known as the R138. Handle is Medium round, additional handle options are shown below.

VSCN4Offset Universal Sickle #4

Both sickles have an identical moderate size, medium-reach length and blade widths of 0.8 mm that taper to a point. The tips have a 20° mirror image offset to allow better access to anteriors and premolars. Also known as the R138. Featuring our Relyant Handle, additional handle options are shown below.

CENSN4Offset Universal Sickle #4

Both sickles have an identical moderate size, medium-reach length and blade widths of 0.8 mm that taper to a point. The tips have a 20° mirror image offset to allow better access to anteriors and premolars. Also known as the R138. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSN4Offset Universal Sickle #4

Both sickles have an identical moderate size, medium-reach length and blade widths of 0.8 mm that taper to a point. The tips have a 20° mirror image offset to allow better access to anteriors and premolars. Also known as the R138. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESCN135Posterior Scalette N135

Combines a long-reach shank and a thin curette blade that is pointed like a scaler to provide easy adaptation to both supra and sub-gingival areas and excellent interproximal access. The mirror image tips have a 0.8 mm blade width set on 1 mm terminal shanks with a 12 mm reach. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESCN135Posterior Scalette N135

Combines a long-reach shank and a thin curette blade that is pointed like a scaler to provide easy adaptation to both supra and sub-gingival areas and excellent interproximal access. The mirror image tips have a 0.8 mm blade width set on 1 mm terminal shanks with a 12 mm reach. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESCN135Posterior Scalette N135

Combines a long-reach shank and a thin curette blade that is pointed like a scaler to provide easy adaptation to both supra and sub-gingival areas and excellent interproximal access. The mirror image tips have a 0.8 mm blade width set on 1 mm terminal shanks with a 12 mm reach. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSCN135Posterior Scalette N135

Combines a long-reach shank and a thin curette blade that is pointed like a scaler to provide easy adaptation to both supra and sub-gingival areas and excellent interproximal access. The mirror image tips have a 0.8 mm blade width set on 1 mm terminal shanks with a 12 mm reach. Handle is Medium round, additional handle options are shown below.

VSCN135Posterior Scalette N135

Combines a long-reach shank and a thin curette blade that is pointed like a scaler to provide easy adaptation to both supra and sub-gingival areas and excellent interproximal access. The mirror image tips have a 0.8 mm blade width set on 1 mm terminal shanks with a 12 mm reach. Featuring our Relyant Handle, additional handle options are shown below.

CENSN135Posterior Scalette N135

Combines a long-reach shank and a thin curette blade that is pointed like a scaler to provide easy adaptation to both supra and sub-gingival areas and excellent interproximal access. The mirror image tips have a 0.8 mm blade width set on 1 mm terminal shanks with a 12 mm reach. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

RENSN135Posterior Scalette N135

Combines a long-reach shank and a thin curette blade that is pointed like a scaler to provide easy adaptation to both supra and sub-gingival areas and excellent interproximal access. The mirror image tips have a 0.8 mm blade width set on 1 mm terminal shanks with a 12 mm reach. Featuring our DuraLite Round Handle, additional handle options are shown below.

CESC157-158Posterior Sickle #157-158

Mirror image blades on a long-reach terminal shank that is set at 40° to the handle. The blades have a reach of 5 mm and a width of 0.8 mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

ESC157-158Posterior Sickle #157-158

Mirror image blades on a long-reach terminal shank that is set at 40° to the handle. The blades have a reach of 5 mm and a width of 0.8 mm. Featuring our DuraLite Hex Handle, additional handle options are shown below.

RESC157-158Posterior Sickle #157-158

Mirror image blades on a long-reach terminal shank that is set at 40° to the handle. The blades have a reach of 5 mm and a width of 0.8 mm. Featuring our DuraLite Round Handle, additional handle options are shown below.

RSC157-158Posterior Sickle #157-158

Mirror image blades on a long-reach terminal shank that is set at 40° to the handle. The blades have a reach of 5 mm and a width of 0.8 mm. Handle is Medium round, additional handle options are shown below.

VSC157-158Posterior Sickle #157-158

Mirror image blades on a long-reach terminal shank that is set at 40° to the handle. The blades have a reach of 5 mm and a width of 0.8 mm. Featuring our Relyant Handle, additional handle options are shown below.

CENS157-158Posterior Sickle #157-158

Mirror image blades on a long-reach terminal shank that is set at 40° to the handle. The blades have a reach of 5 mm and a width of 0.8 mm. Featuring our DuraLite ColorRings Handle, additional handle options are shown below.

Nordent Hygiene Instruments

We offer the highest quality and the best value in the industry.

We use only the finest domestic high-carbon surgical stainless steels and a proprietary cryogenic hardening and tempering process to ensure long-lasting sharpness and durability. Each instrument is meticulously shaped and finished by expert craftsmen and 100% made in the USA!