Barnhart
Barnhart is a medium length at 10 mm long, as opposed to the short 8 mm shank of the Columbia 13-14. This medium length terminal shank seems to fit very well with most hygienists, providing enough reach to comfortably reach all posterior surfaces. The blade of the Barnhart 5-6 is slightly thinner than the Columbia, which provides easier insertion into the gingival pocket and improved access to deeper pockets. However, that same Barnhart 5-6 tip is available with thinner blades in the Barnhart 5S-6S and thicker blades in the Barnhart 5R-6R.
-
The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Hex Handle, additional handle options are shown below.
-
The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Round Handle, additional handle options are shown below.
-
The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Handle is Medium round, additional handle options are shown below.
-
The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our Relyant® Handle, additional handle options are shown below.
-
The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Round Handle, additional handle options are shown below.
-
The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Hex Handle, additional handle options are shown below.
-
The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite Round Handle, additional handle options are shown below.
-
The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Handle is Medium round, additional handle options are shown below.
-
The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our Relyant® Handle, additional handle options are shown below.
