-
Combines the same tips as the traditional Molt 9 but the round end has a 3 mm suture hole.
-
Combines a small curved blade that is 4mm wide and a rounded tip with a uniquely angled cutting blade on straight shank. Both ends are sharp around the periphery.
-
Combines a small curved blade that is 4mm wide and a rounded tip with a uniquely angled cutting blade on straight shank. Both ends are sharp around the periphery.
-
Back-Action Hoe with opposing blade angles and semi-circular cutting edges on each side of the 4mm blade.
-
Back-Action Hoe with opposing blade angles and semi-circular cutting edges on each side of the 4mm blade.
-
Combines a back action chisel with a 3.5mm blade width and a straight chisel that is 2.5mm wide.
-
Combines a back action chisel with a 3.5mm blade width and a straight chisel that is 2.5mm wide.
-
Double ended back action chisels with blade widths of 3.5mm and 5.0mm.
-
Double ended back action chisels with blade widths of 3.5mm and 5.0mm.
-
Interdental "pull stroke" file with one non-cutting surface per tip.
-
Interdental "pull stroke" file with one non-cutting surface per tip.
-
Interdental "pull-stroke" file with two non-cutting surfaces per tip.
-
Interdental "pull-stroke" file with two non-cutting surfaces per tip.
-
Interdental "push-pull stroke", curved file with two non-cutting surfaces per tip.
-
Interdental "push-pull stroke", curved file with two non-cutting surfaces per tip.
-
Opposing angle configuration with identical 2.0 mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Opposing angle configuration with identical 2.0 mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Mirror image configuration with identical 2.0 mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Mirror image configuration with identical 2.0 mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Short opposing angle configuration with identical 1.4mm blade widths.
-
Short opposing angle configuration with identical 1.4mm blade widths.
-
Opposing angle configuration with identical 1.4mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Opposing angle configuration with identical 1.4mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Mirror image configuration with identical 1.4mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Mirror image configuration with identical 1.4mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Mirror image tips with blades that are 3.5mm in width. The blade angles allow excellent access to distal surfaces.
-
Mirror image tips with blades that are 3.5mm in width. The blade angles allow excellent access to distal surfaces.
-
A double ended version of the Ochsenbein #1 and #2. Both blades are 5mm wide. Available in three handle designs.
-
A double ended version of the Ochsenbein #1 and #2. Both blades are 5mm wide. Available in three handle designs.
-
Double ended opposing blades that are 2.0mm wide with semi-circular cutting edges on each side and set at a 15° angle.
-
Double ended opposing blades that are 2.0mm wide with semi-circular cutting edges on each side and set at a 15° angle.
-
Double ended opposing blades that are 2.0mm wide with semi-circular cutting edges on each side and set at a 10° angle.
-
Double ended opposing blades that are 2.0mm wide with semi-circular cutting edges on each side and set at a 10° angle.
-
All Nordent forceps are manufactured of a special stainless steel for maximum performance, longevity and corrosion resistance. All forceps are the American style with hidden pins, unless otherwise noted as "English Pattern" which have visible pins. Most forceps can be ordered with serrartions added along the beaks for increased grip along the tooth surface.
