-
Mirror image blades that taper to a point from a 0.8 mm width. The terminal shank is offset 60° from centerline and has a 10 mm reach. Featuring our DuraLite Round Handle, additional handle options are shown below.
-
Expro, DE, Probe #N33 (3-6-9-12 mm) - #23, DuraLite Round Handle
-
Both sickles have an identical moderate size, medium-reach length and blade widths of 0.9 mm that taper to a point. The tips have a 10° mirror image offset to allow better access to anteriors and premolars. This design is also known as H6/H7. Featuring our Relyant® Handle, additional handle options are shown below.
-
Combines a small size, medium-reach length sickle that has a 0.8 mm blade width that tapers to a point with a long reach contra-angle spoon blade hoe that has a blade diameter of 2 mm for anterior lingual surfaces. Featuring our DuraLite Round Handle, additional handle options are shown below.
-
Mirror image blades on a long-reach terminal shank that is set at 30° to the handle. The blades have a reach of 5.5 mm and a width of 0.9 mm. Featuring our Relyant® Handle, additional handle options are shown below.
-
Composite Placement, DE, Titanium-Nitride Coated, Paddle/Condenser #52 (1.4 mm), DuraLite Round Handle
-
Sharpening Machine, InstRenew Sharpening Assistant
Special Promotion
-
Both sickles have an identical moderate size, medium-reach length and blade widths of 0.9 mm that taper to a point. The tips have a 10° mirror image offset to allow better access to anteriors and premolars. This design is also known as H6/H7. Featuring our DuraLite Round Handle, additional handle options are shown below.
-
Combines the moderate size, medium-reach N5 sickle that has a blade width of 0.9 mm that tapers to a point with a small contra-angle hoe that has a blade width of 2 mm for anterior lingual surfaces. For routine use. Featuring our DuraLite Round Handle, additional handle options are shown below.
-
Modified Barnhart 5-6 with slender blades. The terminal shank is 10 mm long with a blade width of 0.7 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Handle is Medium round, additional handle options are shown below.
-
Composite Placement, DE, Titanium-Nitride Coated, Condenser #30, DuraLite Round Handle
-
Back-Action bend with a 3.7mm blade width. Also available with serrated blades for extra gripping action along the blade surface or with titanium-nitride coating to further extend the life of blade sharpness.
-
Composite Placement, DE, Titanium-Nitride Coated, Double Paddle #LR Curved, DuraLite® ColorRings™ Handle
-
Anterior Offset Sickle N6
- Scaler
- Our tried-and-true signature stainless steel tips
- Disposing of the tips instead of the full instrument allows your dental office to reduce waste compared to using conventional instruments.
- Replace one tip at a time when needed with Hartzell cone socket instruments, saving on the lifetime cost of your scalers and curettes.
-
Younger-Good curettes feature a shank curvature that adapts easily to 2nd and 3rd molars. The elliptical blade shape has a rounded toe and is 1 mm wide. Featuring our DuraLite Round Handle, additional handle options are shown below.
-
Explorer, DE, Old Dominion University (ODU) #11-12, DuraLite Round Handle
-
Anterior Offset Sickle N7
- Scaler
- Our tried-and-true signature stainless steel tips
- Disposing of the tips instead of the full instrument allows your dental office to reduce waste compared to using conventional instruments.
- Replace one tip at a time when needed with Hartzell cone socket instruments, saving on the lifetime cost of your scalers and curettes.
-
UC/Ratcliff 2:
- Curette
- Our tried-and-true signature stainless steel tips
- Disposing of the tips instead of the full instrument allows your dental office to reduce waste compared to using conventional instruments.
- Replace one tip at a time when needed with Hartzell cone socket instruments, saving on the lifetime cost of your scalers and curettes.
-
Columbia curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shank is 1.1 mm in diameter and 12 mm long with an elliptical blade shape that is 1.2 mm wide. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
