-
Both sickles have an identical moderate size, medium-reach length and blade widths of 0.8 mm that taper to a point. The tips have a 20° mirror image offset to allow better access to anteriors and premolars. Featuring our long-lasting UltraSteel™ edge and customizable ColorRings®
-
Combines a moderate-size, medium-reach sickle that has a blade width of 0.9 mm that tapers to a point with a universal curette that has sharp cutting edges on both sides of the blade and a rounded toe. The Long Reach curette has a 0.8 mm blade width and a 1 mm diameter terminal shank with a 12 mm reach. Featuring our long-lasting UltraSteel™ edge and customizable ColorRings®
-
Combines the moderate-size, medium-reach N5 sickle that has a blade width of 0.9 mm that tapers to a point with a small contra-angle hoe that has a blade width of 2 mm for anterior lingual surfaces. For routine use. Featuring our long-lasting UltraSteel™ edge and customizable ColorRings®
-
Both sickles have an identical moderate size, medium-reach length. The N5 blade width is 0.9 mm and the 5S blade is reduced by 20% to 0.7 mm to help gain access in very tight contact areas. Featuring our long-lasting UltraSteel™ edge and customizable ColorRings®
-
Thinner version of the USC128 sickle, with a blade width of 1mm. Featuring our long-lasting UltraSteel™ edge and customizable ColorRings®
-
Mirror image blades on a long-reach terminal shank that is set at 30° to the handle. The blades have a reach of 5.5 mm and a width of 1.1 mm. Featuring our long-lasting UltraSteel™ edge and customizable ColorRings®
-
Mirror image Jacquette. Both blades are 4 mm long and have a blade width of 0.9 mm. Also known as the #34-35. Featuring our long-lasting UltraSteel™ edge and customizable ColorRings®
-
The unique bends of the N129 are easy to adapt to any area without excessive adjustments, while the long slender sickle blades allow for interproximal insertion. Mirror image blades on a medium-reach terminal shank. The blades taper to a point from a 0.8 mm width and have a reach of 10 mm. Featuring our long-lasting UltraSteel™ edge and customizable ColorRings®
-
Mirror image blades on a medium-reach terminal shank that is set at 25° to the handle. The blades have a reach of 4 mm and a width of 1 mm. Featuring our long-lasting UltraSteel™ edge and customizable ColorRings®
-
Probe, SE, Titanium, #N33 (3-6-9-12 mm), DuraLite® Round
-
Probe, SE, Titanium, UNC #N15 (1-15 mm), DuraLite® Round
-
Large Parts BoxIncrease Efficiency by optimizing organization for a smoother workflow Organize your kits efficiently with our secure Snap-In-Silicon™ rails Protect your instruments while also reducing the risk of sharps injuries
-
Probe, DE, Color Coded, Williams Left-Right Offset (1-2-3-5-7-8-9-10 mm), DuraLite® ColorRings™ Handle
-
Probe, DE, Color Coded, Left-Right Offset (3-6-9-12 mm), DuraLite® ColorRings™ Handle
-
Probe, DE, Color Coded, Nabors Bifurcation (3-6-9-12 mm), DuraLite® ColorRings™ Handle
-
Orthodontic, DE, Scaler-Ligature Director #115, DuraLite Round Handle
-
Orthodontic, SE, Ligature Director #N120 (Curved), DuraLite Round Handle
-
Double ended mirror image blades on a contra-angled shank that are pointed for access to interproximal tissue.
-
Orthodontic, DE, Scaler-Ligature Director #115, DuraLite Hex Handle
-
Double ended opposing blades that are 2.0mm wide with semi-circular cutting edges on each side and set at a 10° angle.
-
Double ended opposing blades that are 2.0mm wide with semi-circular cutting edges on each side and set at a 15° angle.
-
Double ended back action chisels with blade widths of 3.5mm and 5.0mm.
-
Combines a back action chisel with a 3.5mm blade width and a straight chisel that is 2.5mm wide.
-
Combines a sharp "hatchet" shaped blade that is 3.5 mm wide and a straight flat blade with a rounded tip that is 4 mm wide.
-
A double ended version of the Ochsenbein #1 and #2. Both blades are 5mm wide. Available in three handle designs.
-
Mirror image tips with blades that are 3.5mm in width. The blade angles allow excellent access to distal surfaces.
-
Has bends similar to the Gracey 7-8. The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.9 mm. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
