-
Mirror image blades on a medium-reach terminal shank that is set at 30° to the handle. The blades have a very gentle curvature and a width of 0.8 mm. Featuring our Relyant® Handle, additional handle options are shown below.
-
Mirror image blades that taper to a point from a 1.5 mm width. The terminal shank reach is 11 mm and is set at 40° to the handle. Featuring our Relyant® Handle, additional handle options are shown below.
-
Combines the large size, long-reach Towner U15 sickle that has a blade width of 1 mm that tapers to a point with a large contra-angle Kirkland hoe that has a blade width of 3.5 mm for use in periodontal surgery. Featuring our Relyant® Handle, additional handle options are shown below.
-
Combines the large size, long-reach Towner U15 sickle that has a blade width of 1 mm with a small size short reach sickle on a straight shank with a 1.5 mm blade. Featuring our Relyant® Handle, additional handle options are shown below.
-
Mirror image blades that taper to a point from a 1 mm width. The terminal shank is set at 40° to the handle with a reach of 13 mm. Featuring our Relyant® Handle, additional handle options are shown below.
-
Back-Action Hoe with opposing blade angles and semi-circular cutting edges on each side of the 4mm blade.
-
Combines a small curved blade that is 4mm wide and a rounded tip with a uniquely angled cutting blade on straight shank. Both ends are sharp around the periphery.
-
Combines an offset teardrop blade and a straight spear shaped blade. Both are 4mm wide and have a sharp periphery.
-
Combines a large curved blade that is 7.5mm wide and has a rounded tip with a curved blade that is 3mm wide and has a rounded tip. Both ends are non-cutting.
-
Combines a curved blade that is 5mm wide and a rounded tip with a flat blade that is 4mm wide and a rounded tip. Both ends are sharp around the periphery.
-
Both curved blades are 4.5mm wide and have a rounded tip. One end is sharpened around the periphery and the other end is non-cutting.
-
Combines a curved blade that is 5mm wide and a rounded tip with a spear shaped blade that is 3.4mm wide and a pointed tip. Both ends are non-cutting.
-
Combines the same tips as the traditional Molt 9 but the round end has a 3 mm suture hole.
-
Standard Woodson composite instrument tips modified to be very thin and sharp for precise soft tissue manipulation.
-
Mirror image configuration with identical 1.4mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Opposing angle configuration with identical 1.4mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Short opposing angle configuration with identical 1.4mm blade widths.
-
Mirror image configuration with identical 2.0 mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Opposing angle configuration with identical 2.0 mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Both tips have a terminal shank that is 21mm long and a 25° angle with different size spoons. One spoon is 2.6mm wide and one is 3.5mm wide.
-
Spoons are set on opposing terminal shanks that are 20mm in length. Both spoons are 3.7mm wide.
-
Combines a flat 6.5mm wide rounded tip paddle set at a 85° angle and a elliptical 3.7mm wide paddle that has a pointed tip.
-
Combines a 3mm and 4mm condenser diameter into one instrument. Both have a 13mm reach.
-
Both tips have a 14mm reach and a 4.7mm diameter condenser that has fine serrations.
