-
Opposing angle configuration with identical 1.4mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Short opposing angle configuration with identical 1.4mm blade widths.
-
Short opposing angle configuration with identical 1.4mm blade widths.
-
Mirror image configuration with identical 2.0 mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Mirror image configuration with identical 2.0 mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Opposing angle configuration with identical 2.0 mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Opposing angle configuration with identical 2.0 mm blade widths and a 14mm terminal shank length set at 40° to the centerline of the handle.
-
Interdental "push-pull stroke", curved file with two non-cutting surfaces per tip.
-
Interdental "push-pull stroke", curved file with two non-cutting surfaces per tip.
-
Interdental "pull-stroke" file with two non-cutting surfaces per tip.
-
Interdental "pull-stroke" file with two non-cutting surfaces per tip.
-
Interdental "pull stroke" file with one non-cutting surface per tip.
-
Interdental "pull stroke" file with one non-cutting surface per tip.
-
Double ended back action chisels with blade widths of 3.5mm and 5.0mm.
-
Double ended back action chisels with blade widths of 3.5mm and 5.0mm.
-
Combines a back action chisel with a 3.5mm blade width and a straight chisel that is 2.5mm wide.
-
Combines a back action chisel with a 3.5mm blade width and a straight chisel that is 2.5mm wide.
-
Back-Action Hoe with opposing blade angles and semi-circular cutting edges on each side of the 4mm blade.
-
Back-Action Hoe with opposing blade angles and semi-circular cutting edges on each side of the 4mm blade.
-
Combines a small curved blade that is 4mm wide and a rounded tip with a uniquely angled cutting blade on straight shank. Both ends are sharp around the periphery.
-
Combines a small curved blade that is 4mm wide and a rounded tip with a uniquely angled cutting blade on straight shank. Both ends are sharp around the periphery.
-
Combines the same tips as the traditional Molt 9 but the round end has a 3 mm suture hole.
-
Combines the same tips as the traditional Molt 9 but the round end has a 3 mm suture hole.
-
Combines an offset teardrop blade and a straight spear shaped blade. Both are 4mm wide and have a sharp periphery.
-
Combines an offset teardrop blade and a straight spear shaped blade. Both are 4mm wide and have a sharp periphery.
-
Combines a large curved blade that is 7.5mm wide and has a rounded tip with a curved blade that is 3mm wide and has a rounded tip. Both ends are non-cutting.
-
Combines a large curved blade that is 7.5mm wide and has a rounded tip with a curved blade that is 3mm wide and has a rounded tip. Both ends are non-cutting.
-
Combines a curved blade that is 5mm wide and a rounded tip with a flat blade that is 4mm wide and a rounded tip. Both ends are sharp around the periphery.
-
Combines a curved blade that is 5mm wide and a rounded tip with a flat blade that is 4mm wide and a rounded tip. Both ends are sharp around the periphery.
-
Both curved blades are 4.5mm wide and have a rounded tip. One end is sharpened around the periphery and the other end is non-cutting.
-
Both curved blades are 4.5mm wide and have a rounded tip. One end is sharpened around the periphery and the other end is non-cutting.
-
Combines a sharp "hatchet" shaped blade that is 3.5 mm wide and a straight flat blade with a rounded tip that is 4 mm wide.
-
Combines a sharp "hatchet" shaped blade that is 3.5 mm wide and a straight flat blade with a rounded tip that is 4 mm wide.
-
Combines a curved blade that is 5mm wide and a rounded tip with a spear shaped blade that is 3.4mm wide and a pointed tip. Both ends are non-cutting.
-
Combines a curved blade that is 5mm wide and a rounded tip with a spear shaped blade that is 3.4mm wide and a pointed tip. Both ends are non-cutting.
-
Combines a large curved blade that is 7.5mm wide and has a rounded tip with a curved blade that is 3.5mm wide and has a pointed tip. Both ends are non-cutting.
