ImplaMate® Implant Maintenance
Our popular series of ImplaMate® scalers are crafted from solid titanium, the same material used in implants, to support safer maintenance and reduced surface disruption. Available in a variety of familiar patterns, they offer an easy transition with no learning curve. Each tip features a distinctive purple tint for quick and easy identification.
-
Combines a moderate size, medium-reach sickle that has a blade width of 0.9 mm that tapers to a point with the universal curette that has sharp cutting edges on both sides of the blade and a rounded toe. The curette has a 0.8 mm blade width and a 1 mm diameter terminal shank with a 9 mm reach. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Has bends similar to the Gracey 11-12. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Has bends similar to the Gracey 11-12. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Has bends similar to the Gracey 13-14. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Has bends similar to the Gracey 13-14. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Has bends similar to the Gracey 7-8. The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.9 mm. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Both sickles have an identical moderate size, medium-reach length and blade widths of 0.9 mm that taper to a point. The tips have a 10° mirror image offset to allow better access to anteriors and premolars. This design is also known as H6/H7. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Mirror image blades on a short-reach terminal shank that is set at 40° to the handle. The blades have a reach of 4.5 mm and a width of 0.9 mm. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
