Nordent Products
“Must have” products and top sellers
Click here to view all of Nordent’s Hygiene Instruments
-
Mirror image tips for facial and lingual adaptation. The blade has a round shape and is 1.0 mm in diameter. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
The blades are set at opposing angles and have a round shape that is 1.0 mm in diameter set on a 14 mm terminal shank. Excellent for mesial and distal adaptation. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Designed to cover a wider area in tight mesial and distal areas. The flattened "tear drop" shaped blade is 2 mm wide and 0.5 mm thick. The terminal shank allows a 14 mm reach. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Both sickles have an identical moderate size, medium-reach length and blade widths of 0.9 mm that taper to a point. The tips have a 10° mirror image offset to allow better access to anteriors and premolars. This design is also known as H6/H7. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Mirror image blades on a short-reach terminal shank that is set at 40° to the handle. The blades have a reach of 4.5 mm and a width of 0.9 mm. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
The terminal shank is 1 mm in diameter and 10 mm long with a blade width of 0.8 mm. Barnhart curettes have universal blades that have sharp cutting edges on both sides of the blade and a rounded toe. The terminal shanks of Barnhart curettes are long and slender. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Combines a moderate size, medium-reach sickle that has a blade width of 0.9 mm that tapers to a point with the universal curette that has sharp cutting edges on both sides of the blade and a rounded toe. The curette has a 0.8 mm blade width and a 1 mm diameter terminal shank with a 9 mm reach. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Has bends similar to the Gracey 11-12. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Has bends similar to the Gracey 11-12. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Has bends similar to the Gracey 13-14. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Has bends similar to the Gracey 13-14. The terminal shank is 1 mm in diameter and 9 mm long with a blade width of 0.9mm. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
-
Has bends similar to the Gracey 7-8. The terminal shank is 1 mm in diameter and 16 mm long with a blade width of 0.9 mm. Featuring our DuraLite® ColorRings™ Handle, additional handle options are shown below.
Click here to view all of Nordent’s Surgical Instruments
-
Stainless steel Frazier suction tips have a relief hole on the thumb rest that allows the practitioner to regulate the intensity of the suction at the tip. Each comes with its own stylette that is used to clear debris from the inside of the tube. (5" / 2 mm internal diameter)
-
Stainless steel Frazier suction tips have a relief hole on the thumb rest that allows the practitioner to regulate the intensity of the suction at the tip. Each comes with its own stylette that is used to clear debris from the inside of the tube. (5" / 3 mm internal diameter)
-
Back-Action Hoe with opposing blade angles and semi-circular cutting edges on each side of the 4mm blade.
-
Back-Action Hoe with opposing blade angles and semi-circular cutting edges on each side of the 4mm blade.
-
Double ended opposing blades that are 2.0mm wide with semi-circular cutting edges on each side and set at a 10° angle.
-
Double ended opposing blades that are 2.0mm wide with semi-circular cutting edges on each side and set at a 10° angle.
-
Double ended opposing blades that are 2.0mm wide with semi-circular cutting edges on each side and set at a 15° angle.
-
Double ended opposing blades that are 2.0mm wide with semi-circular cutting edges on each side and set at a 15° angle.
-
Double ended back action chisels with blade widths of 3.5mm and 5.0mm.
-
Double ended back action chisels with blade widths of 3.5mm and 5.0mm.
-
Combines a back action chisel with a 3.5mm blade width and a straight chisel that is 2.5mm wide.
-
Combines a back action chisel with a 3.5mm blade width and a straight chisel that is 2.5mm wide.
Click here to view all of Nordent’s Orthodontic Instruments
-
Orthodontic, DE, Scaler-Ligature Director #115, DuraLite Round Handle
-
Slim tipped bracket tweezers with tapered tail to aid in bracket manipulation. The thinner working end gives the clinician greater visibility when bringing the bracket to the patients mouth. The thinner back end of the instrument allows for easier manipulation of the brackets position by simply turning the instrument. This feature allows for the use of a single instrument in bracket placement.
-
Carbide steel blade provides maximum durability and sharp edge retention. Cut a range of wires from 0.012” (0.30 mm) to 0.021” x 0.025” (0.53 mm x 0.64 mm). Safely holds the cut off portion to be discarded. Smooth, tapered tip for increased patient comfort. Instrument is approximately 125mm long.
-
Carbide steel blade provides maximum durability and sharp edge retention. Designed to cut wires from 0.012” (0.30 mm) to 0.021” x 0.025” (0.53 mm x 0.64 mm). Safely holds the cut off portion to be discarded. Smooth, tapered tip for increased patient comfort. Instrument is approximately 147mm long.
-
Carbide steel blade provides maximum durability and sharp edge retention. Designed to cut hard wires up to .022” x .028”. This hard wire cutter with 15° offset tip improves access in difficult areas.
-
Carbide steel blade provides maximum durability and sharp edge retention. Designed to cut hard wires up to .022” x .028”
-
Carbide steel blade provides maximum durability and sharp edge retention. Mini pin & ligature cutter enhances ability to reach difficult to access areas. Designed to cut soft wire pins and ligature wires up to .012 (.30 mm).
-
Versatile utility pliers featuring 32°, tapered and serrated beaks accomodates wires up to .030” (.76mm) and is useful for placement and removal of archwires. These pliers help guide the arch wire through buccal tubes and into brackets with ease.
-
2.5 mm tips. Matching serrated pads promote a firm, grip and rounded tips ensure patient comfort. Designed for wire up to .030".
-
Serrated tips provide superior grip of brackets to assist while placing bands.
